Search
In most in vitro cell models, cultures are made adhering to flat culture slides and the expected activation of specific cell markers is measured on cells. However, in this simplified condition, cell response is not representative of the in vivo response, which is based on cell interactions that occur in three-dimensional (3D) non-flat environments and between several cell populations.
Istituto Italiano di...
During the project activities, the authors proposed a conceptual framework, which utilizes resources available in situ through the chemical and physical processes associated with agriculture; the soil and CO2 (if present) are transformed into fibrous plant matter, harvested and finally converted into mechanical and structural components.
Università degli studi...
The technical objective of this study was to understand the net effect of using deorbiting technologies like sails or tethers over the future debris population around Earth. In principle, indeed, these attractive technologies will support the compliancy to post-mitigation disposal guidelines, for small missions. However, the increased cross section also increases the collision risk.
Politechnico di Milano
The number of spacecraft flying in highly nonlinear gravitational fields is largely increased during the last few decades, and probes orbiting in Lissajous or Halo orbits can be found around both the Lagrangian Points L1 and L2 of the Sun-Earth&Moon system.
POLITECNICO DI MILANO
Motivation:
To provide a proof-of-concept demonstration of light rectification in a nano-rectenna as an alternative energy conversation process to semiconductor solar cells based on the photovoltaic effect. For space this alternative energy conversion process could enable applications under different environmental conditions (e.g. temperature ranges, radiation) and offer the advantage of higher theoretical conversion efficiency.
Methodology:
To provide a proof-of-concept demonstration of rectennas working at high frequencies through the development of:
Fondazione Istituto...
The goal of this study is two-fold. First, to identify and develop a DA- based high-order filter for relative pose estimation. The application considered is the rendezvous with an uncooperative target, modelled after ESA's e.deorbit mission. Secondly, the DA algorithms are implemented on hardware mimicking the limited computational power available in space. The resulting implementation is tested in a processor in the loop (PIL) test-bench using the approach phase of the chaser to the uncooperative target to be estimated.
POLITECNICO DI MILANO
Motivation:
To investigate the combination of thermal and photovoltaic effects towards an high efficient photo-to-energy conversion device.
Methodology:
We used numerical simulations based on FEM technique. In particular, we addressed the charge cloud issue in a fully 3D fashion to be able to design and simulate devices as close as possible to reality.
After initial tests based on analytical and 1D numerical techniques, we moved to the 3D device where we investigated the role of cathode-anode
Istituto Fondazione...
KABOOM
We study a low-cost interplanetary mission to demonstrate the capability of artificially modifying the orbit of a small (250 ton) binary asteroid body. The targeting spacecraft survives the slow (~1 m/s) impact to carry out the orbit modification measurement afterwards.
Methodology:
Politechnico di Milano
POLITECNICO DI MILANO
Pages
Filter by programme:
- (-) Remove Discovery filter Discovery
Filter by start year:
- 2016 (4) Apply 2016 filter
- 1996 (2) Apply 1996 filter
- 2002 (2) Apply 2002 filter
- 2004 (2) Apply 2004 filter
- 2005 (2) Apply 2005 filter
- 2000 (1) Apply 2000 filter
- 2003 (1) Apply 2003 filter
- 2006 (1) Apply 2006 filter
- 2007 (1) Apply 2007 filter
- 2011 (1) Apply 2011 filter
- 2012 (1) Apply 2012 filter
- 2014 (1) Apply 2014 filter
- 2017 (1) Apply 2017 filter
- 2020 (1) Apply 2020 filter
- 2022 (1) Apply 2022 filter
Filter by end year:
- 2017 (3) Apply 2017 filter
- 1996 (2) Apply 1996 filter
- 2007 (2) Apply 2007 filter
- 2009 (2) Apply 2009 filter
- 2013 (2) Apply 2013 filter
- 2022 (2) Apply 2022 filter
- 2002 (1) Apply 2002 filter
- 2004 (1) Apply 2004 filter
- 2005 (1) Apply 2005 filter
- 2006 (1) Apply 2006 filter
- 2008 (1) Apply 2008 filter
- 2010 (1) Apply 2010 filter
- 2016 (1) Apply 2016 filter
- 2018 (1) Apply 2018 filter
Filter by keywords:
- Ariadna (6) Apply Ariadna filter
- Solar panels (2) Apply Solar panels filter
- 3D printer (1) Apply 3D printer filter
- Additive Manufacturing (1) Apply Additive Manufacturing filter
- ADR (1) Apply ADR filter
- Alcantara (1) Apply Alcantara filter
- Asteroid (1) Apply Asteroid filter
- Calibration (1) Apply Calibration filter
- CleanSpace (1) Apply CleanSpace filter
- Demisability (1) Apply Demisability filter
- Deorbit (1) Apply Deorbit filter
- E.deorbit (1) Apply E.deorbit filter
- Filter (1) Apply Filter filter
- General Relativiy (1) Apply General Relativiy filter
- GNC (1) Apply GNC filter
- L1 (1) Apply L1 filter
- L2 (1) Apply L2 filter
- Lagrangian Points (1) Apply Lagrangian Points filter
- Modeling (1) Apply Modeling filter
- Navigation (1) Apply Navigation filter
- Off-Earth manufacturing (1) Apply Off-Earth manufacturing filter
- Orbital Mechanics (1) Apply Orbital Mechanics filter
- Planetary Protection (1) Apply Planetary Protection filter
- Power (1) Apply Power filter
- Processors (1) Apply Processors filter
- SAOCOM-CS (1) Apply SAOCOM-CS filter
- SAR (1) Apply SAR filter
- self-growing (1) Apply self-growing filter
- Space debris (1) Apply Space debris filter
- SysNova (1) Apply SysNova filter
- Transfer Orbit (1) Apply Transfer Orbit filter
Filter by contractor:
- (-) Remove di filter di
- milano (12) Apply milano filter
- politecnico (12) Apply politecnico filter
- istituto (4) Apply istituto filter
- politechnico (4) Apply politechnico filter
- torino (3) Apply torino filter
- fondazion (2) Apply fondazion filter
- italiano (2) Apply italiano filter
- tecnologia (2) Apply tecnologia filter
- anna (1) Apply anna filter
- bari (1) Apply bari filter
- cnr (1) Apply cnr filter
- deg (1) Apply deg filter
- dei (1) Apply dei filter
- del (1) Apply del filter
- dipsa (1) Apply dipsa filter
- firenz (1) Apply firenz filter
- inorganich (1) Apply inorganich filter
- italiana (1) Apply italiana filter
- metodologi (1) Apply metodologi filter
- pisa (1) Apply pisa filter
- plasmi (1) Apply plasmi filter
- santa (1) Apply santa filter
- scuola (1) Apply scuola filter
- studi (1) Apply studi filter
- superior (1) Apply superior filter
- tec (1) Apply tec filter
- triest (1) Apply triest filter
- universita (1) Apply universita filter
- università (1) Apply università filter
Filter by country:
Filter by application domain:
Filter by competence domain:
- 2-Structures, Mechanisms, Materials, Thermal (1) Apply 2-Structures, Mechanisms, Materials, Thermal filter
- 6-Life & Physical Science Payloads, Life Support, Robotics & Automation (1) Apply 6-Life & Physical Science Payloads, Life Support, Robotics & Automation filter
- 10-Astrodynamics, Space Debris and Space Environment (1) Apply 10-Astrodynamics, Space Debris and Space Environment filter