Search
The AERODEM is an ESA demonstration mission that will implement an aerocapture phase in order to provide an atmospheric ∆V instead of a standard chemical one for orbiting a SpaceCraft around Mars. The aerocapture technique currently studied relies on a discrete event drag modulation technique that modifies only once the aerocapture module ballistic coefficient by separating / retracting the heatshield.
ArianeGroup
An interplanetary probe must decelerate from a hyperbolic interplanetory trajectory to an orbital trajectory when it arrives at its destination. Currently, this maneuvre is achieved using chemical propulsion, which means that propellant makes up a significant fraction of the vehicle mass. Aerocapture is an alternative concept that instead uses aerodynamic drag from the athmosphere of the planet to decelerate the arriving spacecraft.
VORTICITY LTD
During this Phase 0 maturation study, ASUK, with the support of Thales Alenia Space (TAS), Nammo, MDA and GMV, performed a programmatic, business and technical assessment of a future low-Earth orbit (LEO) refuelling mission. The mission concept proposes developing and demonstrating core technologies in a preliminary service offering to enable a commercial in-orbit refuelling service. Such a service will swiftly redefine how satellites are designed and operated, launching a dynamic and sustainable in-orbit ecosystem with significant potential.
Astroscale
The objective of Fluidics experiment is in the first instance to validate the behavior of fluids predicted by computational tools and a priori models in a controlled long duration microgravity environment. From the technological perspective objective of the experiment addresses issues relative to the slosh of fluids during specific spacecraft and satellites maneuvers. The more fundamental objective aims at observing capillary wave turbulence on the surface of a fluid layer in a low-gravity environment in order to be able to correct the physics assumed in computational tools.
Cnes
Filter by programme:
- (-) Remove Preparation filter Preparation
Filter by start year:
Filter by end year:
Filter by keywords:
- aerobreaking (2) Apply aerobreaking filter
- aerocapture (2) Apply aerocapture filter
- athmospheric drag (2) Apply athmospheric drag filter
- Mars (2) Apply Mars filter
- Orbit insertion (2) Apply Orbit insertion filter
- Orbital capture (2) Apply Orbital capture filter
- Re-entry (2) Apply Re-entry filter
- ADR (1) Apply ADR filter
- interplanetary transfer (1) Apply interplanetary transfer filter
- IOS (1) Apply IOS filter
- micro-gravity (1) Apply micro-gravity filter
- OOS (1) Apply OOS filter
- refuelling (1) Apply refuelling filter
- Servicing (1) Apply Servicing filter
- sloshing (1) Apply sloshing filter
Filter by contractor:
Filter by country:
Filter by application domain:
Filter by competence domain:
- 7-Propulsion, Space Transportation and Re-entry Vehicles (3) Apply 7-Propulsion, Space Transportation and Re-entry Vehicles filter
- 10-Astrodynamics, Space Debris and Space Environment (3) Apply 10-Astrodynamics, Space Debris and Space Environment filter
- 2-Structures, Mechanisms, Materials, Thermal (2) Apply 2-Structures, Mechanisms, Materials, Thermal filter
- 6-Life & Physical Science Payloads, Life Support, Robotics & Automation (2) Apply 6-Life & Physical Science Payloads, Life Support, Robotics & Automation filter
- 8-Ground Systems and Mission Operations (2) Apply 8-Ground Systems and Mission Operations filter
Filter by technology domain:
- (-) Remove 18 - Fluid Dynamics filter 18 - Fluid Dynamics
- 9 - Mission Operation and Ground Data Systems (3) Apply 9 - Mission Operation and Ground Data Systems filter
- 8 - System Design & Verification (2) Apply 8 - System Design & Verification filter
- 10 - Flight Dynamics and GNSS (2) Apply 10 - Flight Dynamics and GNSS filter
- 4 - Space Systems Environments and Effects (1) Apply 4 - Space Systems Environments and Effects filter
- 11 - Space Debris (1) Apply 11 - Space Debris filter
- 19 - Propulsion (1) Apply 19 - Propulsion filter
- 20 - Structures (1) Apply 20 - Structures filter