Search

3 results found
Characterization of MLI materials and definition of MLI blanket for aerobraking environment

Aerobraking phase of ENVISION is critical in terms of duration and required operations. One limitation during aerobraking is the temperature reached on Multi Layer Insulation (MLI) due to the aerothermal heat flux.MLIs can withstand during short durations (intermittent exposure) higher temperatures than their steady state qualification temperature.

Austria

T221-021MT

RUAG SPACE GMBH
Magnetic Powder as Propellant in Electrostatic Thrusters (MPEP)

The main objectives of this project were to develop a thruster prototype based on magnetic powder electrostatic propulsion and to test it in vacuum with direct thrust measurements. The aim was to check the robustness of the concept and to measure and calculate important performance parameters such as thrust and specific impulse, to allow a comparison with other thruster technologies. This project demonstrated for the first time the feasibility of electrostatic propulsion based on powder emission.

Austria

S 2020-02-a

FOTEC GmbH
Smart Resource Management based on Internet of Things to support Off-Earth Manufacturing of Lunar Infrastructures (SMARTIE)

SMARTIE (Smart Resource Management based on Internet of Things to support Off-Earth Manufacturing of Lunar Infrastructures) is an ESA study to assess the requirements, architecture, hardware and software needs and costs for implementation of an Internet of Manufacturing Things (IoMT) for a lunar human base and associated infrastructure. 

Austria

20-D-S-TEC-03-g

Liquifier Systems Group

Filter by programme:

Filter by start year:

Filter by end year:

Filter by keywords:

Filter by contractor:

Filter by country:

Filter by application domain:

Filter by competence domain:

Filter by technology domain:

Filter by status: