The use of higher frequencies is becoming necessary for supporting feeder links of High Throughput Telecom Satellites due to the larger bandwidths available. Q and V bands are now being considered as a baseline for next generation systems. The next step will be to look at W band. In order to understand the system sizing, it is necessary to have a good modelling of the propagation channel. So far no measurement campaign has been done, therefore it is needed to start characterizing the channel.

.

The activity followed the development of an innovative hyperspectral imaging system for remote sensing applications in the thermal infrared. The camera is compact, lightweight and robust. The activity covered the development of the three modules of the imager, namely the spectrometer, the telescope and the detector. The consortium designed and manufactured an innovative spectrometer based on Fourier transform spectroscopy, consisting on calomel birefringent crystals, with working range in the thermal infrared.

Despite different attempts performed in the past two decades, Europe is lacking a competitive product for a large reflector with the requested TRL level to embark on a commercial program. Need is identified to cover antenna applications from 4 up to 18 meter and for frequencies from UHF up to Ka band.. American companies are leaders in this domain and are commercially dominating the worldwide market.

Project HyperClass aimed at accelerating the technology to process spectra received from single pixel images of space objects and:

i) extract the material composition of the object,

ii) classify the object according to a set of predefined features,

iii) estimate the attitude motion from the spectral lightcurve.

The authentication of GNSS signals poses a challenging problem. Before exploiting a signal (e.g. its pseudo-noise sequence) it would be desirable for the receiver to have assurance quickly (ideally in less than 10-s) and reliably that the signal is actually coming from a navigation satellite and not from a spoofer (e.g. unknown pseudolite, delayed version of the same signal). Classical data-level authentication solutions work after signal demodulation (PN sequence de-spreading), require data-level cryptography (shared secrets) and key management.

High-sensitivity GNSS receivers architectures are of interest in harsh propagation conditions in order to be able to keep tracking GNSS signals even at very low C/No conditions (typically down to around 10-20 dBHz, depending on the signal being tracked). For this purpose, open-loop techniques can be used in the estimation of the code delay and the carrier phase and/or frequency, targeting a more robust estimation of those observables. In this process, advanced signal estimation techniques can be applied for the optimum exploitation of e.g. multi-correlation samples.